-
Description
The SpeedyBee AIO - F4 FC + 40A 3-6S 4-in-1 Bluejay ESC combines a high-performance electronics with a powerful 40A ESC. It runs on 3-6S LiPo batteries allowing for a variety of drone setups. It offers Bluetooth BLE, wireless firmware updates, and with multiple UART ports and LED pads for customization. Weighing only 13.6g, it provides reliable performance in a lightweight AIO.
Check out our other AIO flight controllers and all our Speedy Bee products!
Features
- Camera Parameter Adjustment via Betaflight CC pads supported
- Battery Support 3-6S LiPo
- 40A Continuous Current
- Betaflight Compatibility
- 45A (10s) Burst Current
- 8MB Flash Memory
- BLE Bluetooth
- Lightweight
Specifications
FLIGHT CONTROLLER
- 6-pin DJI Sky Port Direct Insertion: Supported, can directly connect to DJI O3/RunCam Link/Caddx Vista without changing wire order
- BOOT Button: Supported, press and hold the BOOT button while powering on to enter DFU mode for firmware recovery
- 9V BEC Output: None (comes with an external BEC module, can switch between 5V and 9V); total current output 2A
- Wireless Flight Controller Firmware Update: Supported (no need to press physical BOOT button)
- DJI Air Unit Connection Method: Supports both 6-pin direct insertion and soldering
- UART: 4 full-function serial ports (UART3, UART4, UART5, UART6 + SBUS[R2])
- 5V BEC Output: Three 5V outputs, total current 2A (shared with 4V5)
- Supported Flight Controller Firmware: BetaFlight (Default), INAV
- Betaflight CC Pads (Camera Parameter Adjustment): Supported
- Dimensions: 33.0mm (length) x 33.0mm (width) x 8mm (height)
- Bluetooth BLE: Supported, Bluetooth speed enhancement 2.0
- LED Pads: Supported, used to control WS2812 LED lights
- Wireless Download & BlackBox Analysis: Not supported
- 4V5 Output: Two 4V5 outputs, total current 1A
- Firmware Target Name: SPEEDYBEE F405AIO
- Mounting: 25.5 x 25.5mm, 2mm hole diameter
- Buzzer Pads: Supported, BZ+ and BZ- pads
- Product Name: SpeedyBee F405 AIO
- Input Voltage: 3S-6S LiPo battery
- Weight: 13.6g (including CNC)
- SmartPort: Not supported
- Flash (for BlackBox): 8MB
- Barometer: SPA06-003
- USB Port Type: Type-C
- ESC Telemetry: None
- Gyro: ICM-42688P
- MCU: STM32F405
- RSSI Pads: None
- OSD: Supported
- I2C: Supported
ESC
- ESC Protocol: Supports DSHOT600/300; other protocols may cause severe errors; please use with caution
- Output Voltage: VBAT battery voltage (used to power the flight controller)
- Current Sensor: Supported (Scale = 254, Offset = 0)
- Product Name: SpeedyBee F405 AIO
- Input Voltage: 3-6S LiPo battery
- Firmware: Bluejay JH-40 48kHz
- Continuous Current: 40A
- Burst Current: 45A (10s)
Includes
- 1x SpeedyBee AIO - F4 FC + 40A 3-6S 4-in-1 Bluejay ESC - 25x25
- 1x Black Heat Shrink Tube for Type-C Extension Module
- 1x 4-pin x 80mm Cable for Type-C Extension Module
- 1x Transparent Heat Shrink Tube for External BEC
- 1x DJI Air Unit 6pin x 80mm Connection Cable
- 4x M2 x 6.6mm Silicone Dampering Sleeve
- 1x 6-pin x 30mm Cable for External BEC
- 1x 35V 470uF Electrolytic Capacitor
- 2x Capacitor Heat Shrink Tube
- 1x Type-C Extension Module
- 1x Practice Soldering Board
- 1x XT30 Power Cable (7cm)
- 1x Power Expansion Board
- 1x Hardware Set
- 1x User Manual
- 1x BEC
